BYMHT - CHAIN LUBE 303
- MSDS: BYMHT
- Manufacturer: CHEMSCOPE CORP
- Product Name: CHAIN LUBE 303
- National Stock Number: 6850-00F045914
Product Identification
Product ID:CHAIN LUBE 303
MSDS Date:03/14/1989
FSC:6850
NIIN:00F045914
MSDS Number: BYMHT
Responsible Party
ARLINGTON, TX 76011-6838
US
Emergency Phone: 800-223-4572/817-640-5656
Info Phone: 817-640-5653/817-640-5656
Cage: 53984
Contractor
Cage: 53984
Ingredients
BUTANE, N-BUTANE
CAS: 106-97-8
RTECS: EJ4200000
OSHA PEL 800 PPM
ACGIH TLV: 1900 MG/CUM
PROPANE (DIMETHYLMETHANE) *95-4*
CAS: 74-98-6
RTECS: TX2275000
OSHA PEL 1000 PPM
ACGIH TLV: SIMPLE ASPHYXIANT
METHYL CHLOROFORM (1,1,1-TRICHLOROETHANE) (CHLOROTHENE NU),
CAS: 71-55-6
RTECS: KJ2975000
Fraction By Weight: 20%
OSHA PEL 350 PPM
ACGIH TLV: 350 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ISOBUTANE, 2-METHYLPROPANE
CAS: 75-28-5
RTECS: TZ4300000
OSHA PEL 1800 MG/CUM
ACGIH TLV: 1000 PPM
PETROLEUM HYDROCARBONS, SOLVENT DEWAXED RESIDUAL OIL
CAS: 64742-62-7
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION & POSSIBLE CORNEAL
INJURY. SKIN: IRRITATION. INHALATION: THROAT IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, DIZZINESS, DROWSINESS, NAUSEA,
ABDOMINAL PAIN, SICKNESS.
First Aid
First Aid:EYES: FLUSH IMMEDIATELY W/WATER FOR 15 MINS. SKIN: WASH
W/WATER FOR 15 MINS. INHALATION: REMOVE TO FRESH AIR. GIVE CPR IF
NEEDED. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION
IN ALL CASE S.
Fire Fighting
Extinguishing Media:DRY CHEMICAL, FOAM, CO2
Fire Fighting Procedures:FIREFIGHTERS USE WATER FOG/SPRAY TO COOL FIRE
EXPOSED AEROSOL CONTAINERS. WEAR SCBA DUE TO THERMAL DECOMPOSITION.
Unusual Fire/Explosion Hazard:CONTENTS UNDER PRESSURE! EXPOSURE TO
TEMPS <120F MAY CAUSE BURSTING.
Accidental Release
Spill Release Procedures:RECOVER FREE LIQUID, SPREAD INERT ABSORBENT
MATERIAL IN AREA, THEN PICK UP & PLACE IN SEALED CONTAINERS. MOP UP
RESIDUE. KEEP LIQUID PRODCUT OUT OF SEWER.
Handling
Handling and Storage Precautions:STORE IN A COOL AREA.
Other Precautions:AVOID BREATHING VAPORS. AVOID CONTACT W/SPARKS, FLAME
& HEATED SURFACES. CONTENTS UNDER PRESSURE. DON'T
PUNCTURE/INCINERATE CONTAINER. KEEP OUT OF THE REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:NONE REQUIRED IF USED W/ADEQUATE VENTILATION.
Ventilation:LOCAL EXHAUST: MAINTAIN ADEQUATE VENTILATION.
Protective Gloves:VITON/POLYVINYL ALCOHOL
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:SOLVENT RESISTANT CLOTHING.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:162F
Melt/Freeze Pt:M.P/F.P Text:NONE
Vapor Density:4
Spec Gravity:1.13
Evaporation Rate & Reference:(ETHER = 1): 1
Solubility in Water:NONE
Appearance and Odor:OPAQUE, YELLOWISH BROWN LIQUID W/MILD SWEET ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, OXIDIZERS & REACTIVE METALS.
Stability Condition to Avoid:FIRE, SPARKS, HOT SURFACES.
Hazardous Decomposition Products:HYDROGEN CHLORIDE, SMALL AMOUNTS OF
PHOSGENE.
Disposal
Waste Disposal Methods:REPLACE CAP & DISCARD AEROSOL CONTAINER
IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.